 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DAP222M Diodes Switching diode DAP222M Application Ultra high speed switching External dimensions (Unit : mm) Land size figure (Unit : mm) 0.8 0.320.05 0.130.05 (3) 0.5 0.4 0.45 0.80.1 1.20.1 Features 1) Ultra small mold type. (VMD3) 2) High reliability. (1) 0.220.05 0.4 0.45 0.30.1 0.60.05 0 1.20.1 00.1 0.4 (2) 0.220.05 0.4 0.50.05 VMD3 Structure Construction Silicon epitaxial planar ROHM : VMD3 dot (year week factory) Taping specifications (Unit : mm) 4.00.07 2.00.04 1.550.05 1.750.07 3.50.05 1.350.05 0 0.50.05 1.30.05 0 (4.00.1) 2.00.05 Absolute maximum ratings (Ta=25C) Parameter Reverse voltage (repetitive peak) Reverse voltage (DC) Forward current (Single Average rectified forward current (Single) Surge current t=1us Power dissipation Junction temperature Storage temperature Symbol VRM VR IFM Io Isurge Pd Tj Tstg Limits 80 80 300 100 4 150 150 -55 to +150 Unit V V mA mA A mW Electrical characteristics (Ta=25C) Parameter Forward voltage Reverse current Capacitance between terminal Reverse recovery time Symbol VF IR Ct trr Min. Typ. Max. 1.2 0.1 3.5 4 Unit V A pF ns Conditions IF=100mA VR=70V VR=6V , f=1MHz VR=6V , IF=5mA , RL=50 Rev.B 00.1 5.50.2 8.00.1 1/2 1.15 DAP222M Diodes Electrical characteristic curves (Ta=25C) 100 Ta=75 10000 Ta=150 Ta=125 10 f=1MHz FORWARD CURRENT:IF(mA) REVERSE CURRENT:IR(nA) 10 Ta=150 Ta=25 100 10 1 0.1 0.01 0.001 Ta=75 Ta=25 Ta=-25 CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ta=125 1000 1 Ta=-25 1 0.1 0 200 400 600 800 1000 0 FORWARD VOLTAGEVF(mV) VF-IF CHARACTERISTICS 20 40 60 80 REVERSE VOLTAGEVR(V) VR-IR CHARACTERISTICS 100 0.1 0 5 10 15 20 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 25 900 100 10 Ta=25 VR=70V n=10pcs 9 8 7 6 5 4 3 2 1 0 IR DISPERSION MAP Ct DISPERSION MAP AVE:1.81pF Ta=25 VR=6V f=1MHz n=10pcs FORWARD VOLTAGE:VF(mV) 70 60 50 40 30 20 10 0 AVE:4.310nA 880 870 860 AVE:870.1mV 850 VF DISPERSION MAP CAPACITANCE BETWEEN TERMINALS:Ct(pF) 890 REVERSE CURRENT:IR(nA) Ta=25 IF=100mA n=30pcs 90 80 20 10 5 RESERVE RECOVERY TIME:trr(ns) PEAK SURGE FORWARD CURRENT:IFSM(A) 9 8 7 6 5 4 3 2 1 0 AVE:1.93ns 15 Ifsm 1cyc 8.3ms PEAK SURGE FORWARD CURRENT:IFSM(A) Ta=25 VR=6V IF=5mA RL=50 n=10pcs 4 3 2 1 0 1 Ifsm 8.3ms 8.3ms 1cyc 10 5 AVE:2.50A 0 IFSM DISRESION MAP trr DISPERSION MAP 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 100 1000 Rth(j-a) 10 9 8 7 6 5 4 3 2 1 0 C=200pF R=0 C=100pF R=1.5k AVE:1.47kV AVE:2.98kV t Rth(j-c) 10 100 Mounted on epoxy board IM=10mA IF=100mA 1ms time 300us 1 0.1 TIME:t(ms) IFSM-t CHARACTERISTICS 1 10 100 10 0.001 0.01 1 10 100 TIME:t(s) Rth-t CHARACTERISTICS 0.1 1000 ESD DISPERSION MAP ELECTROSTATIC DISCHARGE TEST ESD(KV) Ifsm TRANSIENT THAERMAL IMPEDANCE:Rth (/W) PEAK SURGE FORWARD CURRENT:IFSM(A) Rev.B 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1 |
Price & Availability of DAP222M
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |